39
$\begingroup$

What is a good programming language for matter (e.g. molecular or materials) modeling?

Since this is a broad field, I don't expect there to be only one answer.

$\endgroup$
10

13 Answers 13

33
$\begingroup$

Julia

The answers above allude to what some call the "two-language problem". In materials science it takes the form of writing your code in Fortran for speed, and writing an interface to it in Python for sanity and interactivity. Fortran will not go away any time soon due to the massive amount of legacy code available. For new codes, there is a new option: Julia.

With a little bit of care (follow a few simple rules given in the "performance tips" section of the manual), one can easily mix Python-style high-level code and Fortran-style tight inner loops. Julia is easily interoperable with other languages, and reuse existing libraries (the Python interface, in particular, being particularly seamless). Coupled with a very good native ecosystem for numerical computing (unlike Python which is forced to hack together a core language not designed for numerics and NumPy), this makes it a particularly appealing language to use.

At least that has been our experience developing DFTK (https://github.com//JuliaMolSim/DFTK.jl/), a plane-wave DFT code built from scratch. The code is about one year old, ~4k LOC, and covers the basics of such codes. Had we chosen Fortran for this task, we'd still be writing the input file parser and makefile (I'm only partly joking).

$\endgroup$
9
  • 3
    $\begingroup$ I must be going blind. I did not see this when I posted below about Julia. Glad to see others have seen the magic. $\endgroup$
    – B. Kelly
    May 6, 2020 at 2:14
  • 3
    $\begingroup$ Well @CharlieCrown, I added the big title "Julia" after you had written your answer, so until then, this was just a big blob of text with no title! $\endgroup$ Jun 25, 2020 at 0:39
  • $\begingroup$ "writing an interface to it in Python for sanity and interactivity." --- I find Fortran codes like OpenMolcas, CFOUR, Molpro, and MRCC to be much easier to use than PySCF. "Had we chosen Fortran for this task, we'd still be writing the input file parser" --- You can reuse an input parser form any existing Fortran software like OpenMolcas. The problem with the JSON-like format that so many Python codes use, is that there's so many commas and brackets and such, for which one single mistake can cause the program not to run (even if the job was waiting 30 days in the queue before running). $\endgroup$ Mar 7, 2023 at 17:05
  • $\begingroup$ I don't think those statements were meant to compare the ease of usage of some specific computational package, which will depend on the packages being compared. Instead, it was meant to compare the ease of development using these languages, which is package-independent. The main point was that Python is in general beginner-friendly whereas Fortran is needed for fast numerical code. And a code which needs to be both will have to use both languages, i.e., "the two-language problem". This is where Julia comes in as an alternative where code can be both beginner-friendly as well as fast. $\endgroup$ Mar 8, 2023 at 9:12
  • 2
    $\begingroup$ Re "wall", I mean because of the explicit compilation stage. Like in the comment above, imagine you develop a code that solves the Schrödinger equation for an arbitrary potential (or the heat equation with a time-dependent forcing, or something like this). How do you encode the potential? In dynamic languages, you just take a function as input. In fortran, you have to either modify the code and recompile (an often insurmountable barrier for users), or guess what class of potentials the user wants, and do a giant switch. $\endgroup$ Jun 21, 2023 at 7:04
32
$\begingroup$

Fortran

A large part of materials modelling involves density functional theory and molecular mechanics. From this compilation of quantum chemistry software, the most widely used programming language seems to be Fortran.

Indeed, the popular packages VASP (commercial), Quantum Espresso and Siesta (both free) all use this language.

$\endgroup$
5
  • 4
    $\begingroup$ As a non-expert in quantum chemistry, how much do users of those packages need to interact with the code itself to use them? $\endgroup$ May 4, 2020 at 11:40
  • 2
    $\begingroup$ A point worth mentioning in Fortran's favor is that is extremely easy to learn. Because you need so few packages and libraries you can usually get started very quickly. I think fortran90 or 95 would be the best place to start. $\endgroup$ May 4, 2020 at 11:43
  • 5
    $\begingroup$ This would only make sense if you plan on developing/modifying legacy code. Newer codes use less and less Fortran and there the use is continuously reduced towards a number of old well established libraries. Unless you plan to develop these libraries, Fortran will not be particularly useful. - For the average user of quantum chemistry, Fortran might actually be useless. (There are much better languages if you want to automate/process data.) $\endgroup$
    – DetlevCM
    May 16, 2020 at 10:00
  • $\begingroup$ @DetlevCM when you say "newer", how much newer? 2020 and later? $\endgroup$ Jun 20, 2023 at 5:03
  • $\begingroup$ @NikeDattani No, newer than 2000 will already suffice. It is just that rewriting code is time consuming and thus expensive. While there are holdouts that insist on still using it, Fortran is largely relegated to the use with or support of legacy codes that have their roots in the 90ies and earlier. In the context of matter modelling, ORCA is written in C++. I have spent time on a reservoir simulation code that is a C++ replacement for older Fortran code. Now not everything moves to C++, but Fortran is a legacy product (just like COBOL): used where it works, but nobody's choice for new stuff. $\endgroup$
    – DetlevCM
    Jun 21, 2023 at 7:09
24
$\begingroup$

Python

@taciteloquence has already mentioned Python for data analysis and visualization, but let me add one more angle: automation.

Simulation nowadays often means high-throughput, automated simulation. Not only for large scale projects, like Materials Project but also individual projects where large amounts of data generated for screening properties, screeing different geometries, generating data files for machine learning, ABC approaches etc.. For building workflows (eg with automate) or examining the generated databases, Python is good language.

$\endgroup$
24
$\begingroup$

It depends on what you want to do

I'll go first. For context: I do mostly Monte Carlo simulations, especially quantum Monte Carlo. My work has focused on spin systems, using techniques like the Metropolis Algorithm and stochastic series expansion QMC.

For Writing Simulations:

In my field there are few software packages available and the algorithms are sufficiently simple that most people write their own code from scratch. Especially for Monte Carlo, serial performance is key, memory is rarely an issue, so most people use fast, compiled languages like C/C++ or Fortran. Interpreted languages like python are often too slow for intense computations, but people do use hybrid solutions where the expensive calculations are written in C and called from python, which can be a good option.

C/C++ are great general purpose languages that you might want to learn for a whole host of reasons, and when properly optimized, they are very fast.

Fortran is less sophisticated than C/C++, but it is designed for writing simulations, so stuff like complex numbers, exponential and power functions are native. It's also very fast. In my experience, it's basically impossible to write slow Fortran code.

For Data Processing/Plotting:

After the simulations are done, you need post-processing programs to perform averages, calculate derived quantities and make figures. Here, speed is not important, so most people use an interpreted language. I personally use MATLAB (and it's GNU clone, Octave) for post-processing and plotting. MATLAB is commercial software, so the documentation is great and it works reliably on all sorts of machines. I can write scripts to fully automate plotting and they work reliably for years. The (literal) price you pay is that you have to buy a license or use one provided by your institution. Matlab can be pretty expensive.

If you're starting from scratch, it's probably a better idea to learn python. Python is a powerful, flexible language and it has a billion packages that make it pretty easy to get started on anything. There are a lot of resources for learning python and, unlike Matlab, it's free.

$\endgroup$
6
  • 2
    $\begingroup$ My own opinion: for MCMC simulations I prefer R as it is good for statistical analysis. $\endgroup$ May 4, 2020 at 10:31
  • 1
    $\begingroup$ I think it depends on the kind of MC simulations you are doing. For physics I don't know anyone that uses R for the simulations themselves. What type of MC are you using? $\endgroup$ May 4, 2020 at 11:41
  • $\begingroup$ The main ones I've used are Metropolis-Hastings and Gibbs, though I'm more statistician than physicist, hence my own opinion. $\endgroup$ May 4, 2020 at 14:39
  • 1
    $\begingroup$ I'm glad to see FORTRAN and MATLAB here. As for Python, does it really have a billion packages? $\endgroup$ May 5, 2020 at 5:11
  • $\begingroup$ @NikeDattani, I'm being a bit hyperbolic, but there sure are a lot of python packages out there. $\endgroup$ May 5, 2020 at 7:12
24
$\begingroup$

Julia

Okay, I have to add Julia.

Everyone is saying Fortran or Python, and I love them both, but they both have issues. Fortran is easy for a compiled language to write, but I still have SIGSEGV burned into my retinas. Python is fast to write, but very slow. Learning how to cleverly make python fast (and it is still not all that fast) takes more time and skill than learning Fortran.

I will say, for Quantum Mechanical calculation, there are many Numpy libraries that essentially do the hard parts in C/C++/Fortran, so I will not complain about using python for Quantum Mechanics. However, if you think you as a beginner are going to write fast Python code... forget about it. You need to learn Python, as well as all of the specializations in Numpy and Scipy.

However, for atomistic simulation (molecular mechanics), there is only brute force for loops. Vectorization only gets you so much, and Python drives me crazy here.

Julia however is as easy to write as Python, as pleasant to write as Python, and, so long as you follow some simple rules, such as making sure you do not change a variables type accidently, as fast as Fortran. There are built in standard tools for helping with this such as @code_warntype

The only downside to Julia is that the bandwagon picked Python. However, that is changing. Julia is on the rise.

If you want to write a prototype, which then turns out to be just as fast as a compiled language (because it is) choose Julia.

$\endgroup$
0
20
$\begingroup$

It depends on what you want to do

I think one major question that needs to be asked is "What do you want to do?".

Develop new quantum chemistry codes? Use them more efficiently? Automate data processing? User @taciteloquence Has given a good answer I think. Many legacy codes are written in Fortran - newer codes will be typically written in C or C++. I believe there is also a Python project as well as a toolkit tying "things" together written in Python (The Atomic Simulation Environment). So as little as I personally like Python, it is used in the field.

To process data, you have two main approaches: Deal with the binary files or deal with the text files. I have myself written C++ code to extract and process data from text files.

If you have numerical data, it can be processed well in R. I actually started with a mix of C++ and R for extraction and processing but then gravitated to C++ only as it was faster (and I also ended up improving a lot of the underlying workflow structure). Still, I suspect my code "died" when I finished the PostDoc...

Another code I wrote (which lead to a recently published paper by a PhD student) was a C++ implementation of solvation models that existed in Fortran already. Why? It enabled "us" to optimise a model and the use of RAM for storing data lead to very significant performance increase. Oh, and I wrote the code to work with ORCA output. But in the end, your choice of post-processing language is effectively personal. Use what you like - what your colleagues can use. Be it C++, R, etc. For computation-heavy tasks, compiled languages will typically give better performance that interpreted languages. R? Lovely plot and data post processing, but loops are much slower than in C++ and the data structure is limited compared to structs/classes in C++. So basically, chose based on interest and maybe based on what the people around you use (with some qualifiers - I would argue that Excel should in many cases not be used...).

Something that wasn't touched upon by others: Automation. Learn some Bash (or another shell of your choice). My paper on fitting regression coefficients? I built the xyz geometries by hand, but then just ran the calculations using scripts. I did NOT write the input files with the methods by hand. A good scripting language will allow you to automate many mundane tasks. Once upon a time I used to write job scheduler scripts by hand... Nowadays I create a script to submit the job which I can call. I spend time figuring it out once but afterwards do not wear out my patience with menial tasks. So definitely look into scripting.

Though automation can also use more classical programming languages. If you have a set series of steps you wish to carry out. Let me given a rough example:

  • You run a large number of quantum chemistry calculations (optimisations and frequencies).

  • You use bash to extract the location of all text files

  • You hand the list of file paths to a C++ code that extracts the desired data from the output files into a database. This can include further tasks such as identifying non-converged geometries, transition states, etc. Your limitation for many data-processing tasks is often your own competency. And the best way to get better at it, is to gain experience.

For those interested in the papers I mentioned, I leave you with the DOIs. - In terms of tools, I was using bash, C++ and R.

10.1016/j.fluid.2020.112614

10.1002/jcc.25763

$\endgroup$
7
  • $\begingroup$ Great point about automation with shell scripting! That's a skill that is often overlooked, and rarely taught formally. I wrote that answer while preparing a workshop on bash scripting and I still forgot to mention it. $\endgroup$ May 18, 2020 at 4:08
  • $\begingroup$ @taciteloquence Why don't you add it to your answer? - Many people won't scroll over all responses.? :) $\endgroup$
    – DetlevCM
    May 18, 2020 at 19:59
  • $\begingroup$ @DetlevCM, is that okay? I don't know what the SE norms are and I don't want to be seen as plagarizing your answer. $\endgroup$ May 20, 2020 at 9:57
  • $\begingroup$ Do it the academic way and give credit if you take someone else's idea. That deals with the moral side and it ensures that the person inspiring the comment is credited. There is also longterm value in acknowledging an existing answer with fewer votes and improving a response with more votes which is more likely to be seen. The underlying license for a lot on the Stackexchange network is creative commons - so forward use on Stackexchange is typically possible without constraints. (Some specifics may apply in some cases, e.g. photos which might not be CC.) $\endgroup$
    – DetlevCM
    May 20, 2020 at 12:04
  • $\begingroup$ @taciteloquence (Long comment above.) Also: I am not talking about just parroting an existing answer (which I believe is frowned upon, especially amongst early responses) but improving/extending a comprehensive response. In addition, there tends to be an edit history on the Stackexchange network when posts get amended. $\endgroup$
    – DetlevCM
    May 20, 2020 at 12:06
20
$\begingroup$

It depends on what you want to do

It depends on what you want to do. As a couple of others have pointed out, many of the computer programs used in computational chemistry and theoretical solid state physics are written in Fortran. However, that does not imply that you should learn Fortran and it does not mean that Fortran is the best language for materials modelling.

Even if you are concerned with writing serious code for a DFT/MD code. Consider that languages like Python and Julia are very easy to pick up. If you want to get to learn the theory and spend less time thinking about the implementation (as beginners should), it's hard to beat these languages. The other advantage that python has is that it has by far the best ecosystem surrounding modelling programs. The atomic simulation environment (ASE) has very significantly improved my productivity when working with programs like VASP.

That said, it doesn't mean that you cannot use python to contribute to serious DFT codes. the best example would be GPAW:

developing a DFT program takes a lot of time and when competitors had a headstart of decades you need ot catch up. ~80 % of GPAW are written in python and the very performance critcal parts are written in C. This allows them to regularly ship new versions with significant amounts of new features.

Furthermore python can be made very fast via numba, cython (see relevant answer) or pybind11, but it has some pitfalls. It is not as easy to implement complicated and performant, data structures in Python as it is in C++.

It should be noted that I am not saying you shouldn't learn Fortran. It is a perfectly good choice for a high performance computing language. The big problems Fortran has are that it lacks essential features of modern programming languages, like a package manager and the fact that there are essentially only very large projects. Therefore, it can be difficult to progress after you get the basics down. There are no medium sized projects one could contribute to. There are some recents efforts to make Fortran more popular again, namely https://fortran-lang.org/

At the end of the day, it depends on what you make of these languges as any of them are fine to learn.

$\endgroup$
19
$\begingroup$

Python

Python is definitely a good language for scientific calculation.

  1. The syntax is very simple. It is not hard to implement some novel method and conduct preliminary tests.

  2. The library is abundant. One could almost do everything in python. There are many open source libraries in python that implement a variety of libraries of scientific computing and data analysis.

  3. It is not hard to build interface with other languages. One drawback of python is its low efficiency. While there are many ways to build interface to other languages(e.g. to build python-c interface, one could use Cython (see relevant answer) or cprofile):

$\endgroup$
3
  • 3
    $\begingroup$ Python definitely can be fast if you optimize it carefully or use clever packages, and its flexibility makes it great for prototyping. But it's easy to write slow python code. In many cases, CPU time is less important than development time, and in those cases, the advantage of fast development time may outweigh the inefficiency of python. $\endgroup$ May 5, 2020 at 7:15
  • 1
    $\begingroup$ Julia is the same ease of writing, and gives you fortran speed out of the box. All you need to do is run @code_warntype to make sure you haven't accidentally changed a variables type (that really slows down the compiler when it does not know for sure what the types are). $\endgroup$
    – B. Kelly
    May 5, 2020 at 15:37
  • 1
    $\begingroup$ @taciteloquence this reminds me of the quantum simulation package called SlowQuant: slowquant.readthedocs.io/en/latest $\endgroup$ May 5, 2020 at 16:17
17
$\begingroup$

Cython

There are currently two answers suggesting Python (by Paulie Bao and Greg). Python is a high-level, interpreted, dynamically typed, garbage collected, and general-purpose programming language. All this means is that you can have an actually working, readable piece of code in a considerably short amount of time and that this code can do pretty much anything (from machine learning to convex optimization to parsing computational chemistry logfiles).

But coding faster does not mean fast code. This has been argued in other answers, particularly in the context of compiled (e.g. C/C++/Fortran/etc.) versus interpreted languages (such as Python, see answers by taciteloquence, Antoine Levitt, DetlevCM, Camps♦, etc.). Of course, you could try to avoid this discussion by using the many Python libraries that actually wrap C/C++/Fortran codes, such as NumPy or SciPy; this is probably fine for using Python as an (excellent) replacement for MATLAB/Octave (see this answer as well), but this might not be enough. What if we could compile Python? Better yet, what if we could only compile the bottlenecks?

Cython can be described as a C/C++-compiler for Python. You can either compile pure Python code (for which you can expect a 30-40% performance boost) or an annotated version of it (for which you might not see a difference from pure C). The good thing is that the compiled modules are fully interoperable with the Python ecosystem.

$\endgroup$
15
$\begingroup$

Compiled Languages

Since all simulations are CPU and memory consuming, I recommend to not use interpreted language like Java, Julia*, Python, etc.

Compiled languages are converted directly into machine code that the processor can execute. As a result, they tend to be faster and more efficient to execute than interpreted languages. They also give the developer more control over hardware aspects, like memory management and CPU usage.

More information about the advantages/disadvantages can be read here.

*Julia is not an interpreted language but uses just-in-time (JIT) compilation, implemented using LLVM. See a related answer.

$\endgroup$
4
  • 12
    $\begingroup$ I disagree incredibly strongly on saying not to use Julia. It matches my Fortran molecular dynamics and monte carlo algorithms for speed and took on the order of days to write. Also, writing parallel and GPU code is alot simpler.Final note: Julia is compiled to LLVM. $\endgroup$
    – B. Kelly
    May 4, 2020 at 22:20
  • 4
    $\begingroup$ @CharlieCrown I fully agree: Julia is a Petaflop Club language, fast and scalable, and there is no reason to dismiss it. $\endgroup$
    – Greg
    May 5, 2020 at 4:56
  • 2
    $\begingroup$ Yes, Julia is not interpreted, it's just compiled at runtime. $\endgroup$ Jun 17, 2020 at 9:38
  • 1
    $\begingroup$ @SusiLehtola, you are absolutely right, it is not interpreted. You only need LLVM (written in C++ and is designed for compile-time, link-time, run-time, and "idle-time" optimization) to run it. $\endgroup$
    – Camps
    Jun 18, 2020 at 10:51
12
$\begingroup$

Common Lisp

Recently I watched a couple impressive talks by Christian Schafmeister, where he discusses how they actually built a full fledged Common Lisp implementation on top of LLVM, named Clasp, targeted at molecular design:

Clasp: Common Lisp using LLVM and C++ for Designing Molecules

2018 LLVM Developers’ Meeting: C. Schafmeister “Lessons Learned Implementing Common Lisp with LLVM”

Common Lisp is a dynamic language almost as old as Fortran. Among the reasons to choose it, Schafmeister cites a stable standard, proper macros and unmatched energy efficiency when compared to other dynamic languages, as shown in this table[2]:

enter image description here

References:

  1. Schafmeister, Christian A., and Alex Wood. “Clasp Common Lisp Implementation and Optimization.” Proceedings of the 11th European Lisp Symposium on European Lisp Symposium, European Lisp Scientific Activities Association, 2018, pp. 59–64.

  2. Pereira, Rui, et al. “Energy Efficiency across Programming Languages: How Do Energy, Time, and Memory Relate?” Proceedings of the 10th ACM SIGPLAN International Conference on Software Language Engineering, Association for Computing Machinery, 2017, pp. 256–267. ACM Digital Library, doi:10.1145/3136014.3136031.

  3. Schafmeister, Christian E. “CANDO: A Compiled Programming Language for Computer-Aided Nanomaterial Design and Optimization Based on Clasp Common Lisp.” Proceedings of the 9th European Lisp Symposium on European Lisp Symposium, ELS2016, 2015, p. 9.

$\endgroup$
1
12
$\begingroup$

Bash Scripting

I have used bash scripts to automate materials modelling workflows. You can use online resources to learn more about bash commands and bash scripting. The idea is simple. If you have a repetitive and time-consuming task just write the terminal commands (usually run directly in the command line interface) on to a "file_name.sh" file and run it.

An example of a bash script to extract pressure, energy values from a quantum ESPRESSO output file can be found here.

$\endgroup$
1
  • 2
    $\begingroup$ I can't believe no one has said this (at least not this clearly) before now. I scrolled through the answers several times before I finally realized that no one had. $\endgroup$ Nov 3, 2020 at 15:44
11
$\begingroup$

MATLAB

I have upvoted a lot of the other answers here, and I didn't write this answer at first because most matter modeling software doesn't use it, mainly for reasons I mention below.

However, there's a lot of answers here now: not just the best or most popular languages for matter modeling, and MATLAB does have its place. You will quickly notice that I love MATLAB and will appear biased, so I will start first with the disadvantages:

Disadvantages:

  • It costs a lot of money (not a big problem if you're at a university or company that offers free or very cheap licenses, but license renewal can still be a headache and supercomputers with thousands of cores often won't have a license). The free "clone" of MATLAB called Octave, is still not perfect: there's slight differences between MATLAB and Octave, there's some issues with the GUI, running things on GPUs is not as straightforward as in MATLAB, not all toolboxes are available, the debugger and profiler are not the same, etc.
  • It's a heavy-weight program that (by default) takes a long time to load (compared to python which opens right when you run the command: python).
  • Things such as loops within loops or function calls within function calls can significantly slow down the code, so you won't always get the speeds that you'll get with FORTRAN, C or C++.
  • While theoretically you can do anything you want in MATLAB (including object oriented programming), "full-fledged" programming languages like Python might allow more flexibility (for example for arrays within arrays, without using cell arrays).
  • The symbolic computing toolbox is not as user-friendly as a full-fledged symbolic programming software like Mathematica or Maple (which unfortunately isn't very popular anymore though).
  • There's no native support for arbitrary-precision arithmetic (unless possibly with the symbolic computing toolbox).
  • In my limited experience of using the machine learning toolbox for reinforcement learning, I found it to be very inefficient compared to TensorFlow.

Advantages:

  • MATLAB is extremely quick and convenient for coding and debugging. It is like Python, where you don't have to compile every time you want to test your code, but significantly simpler and easier to code than Python, for example I provided this code to answer a question on Quantum Computing Stack Exchange and in MATLAB it was very simple and painless to write:

function H = Hamiltonian(alpha,h) 
x=[0  1;  1 0 ];
y=[0 -1i; 1i 0];
z=[1  0;  0 -1];
I=eye(2);
H = alpha*kron(kron(x,x),I)+...
    alpha*kron(kron(y,y),I)+...
    alpha*kron(kron(I,x),x)+...
    alpha*kron(kron(I,y),y)+...
    h*kron(kron(I,z),I);

But the python version is longer and much more painful to write, as there's so many more unnecessary parentheses and extra symbols that need to be included:


import numpy as np
def Hamiltonian(alpha,h):
x = np.array([[0,1],[1,0]])
y = np.array([[0,-1j],[1j,0]])
z = np.array([[1,0],[0,-1]])
I = np.array([[1,0],[0,1]])
H =  (alpha*np.kron(np.kron(Sx,Sx),I))
H =+ (alpha*np.kron(np.kron(Sy,Sy),I))
H =+ (alpha*np.kron(np.kron(I,Sx),Sx)) 
H =+ (alpha*np.kron(np.kron(I,Sy),Sy))
H =+ (h*np.kron(np.kron(I,Sz),I))
return H

The output for that example is also much clearer and prettier in MATLAB than for Python. Here's another example that came up in the past: Get 10 random integers from 6-19.

In MATLAB:

randperm(14,10)+5

In Python:

import numpy as np
np.random.choice(range(6,19), 10, replace=False)

I have not yet found an example which was the other way around, where Python could do something more neatly or easily than MATLAB. If you do know any examples, I'd love to see you add it to this "MATLAB vs Python" Git repo I made some time ago. Maybe what Python calls "broadcasting" is simpler than MATLAB's version which is bsxfun (binary singleton expansion function), but since version 2016b this is no longer true.

  • If you spend a little more time vectorizing things properly and turning your code into a form that only uses built-in functions (these are MATLAB functions, such as matrix multiplication, that are optimized as much as possible and then compiled into machine code, so running them will be as fast in MATLAB as in FORTRAN or C), your code can be as fast or faster than FORTRAN or C. My code FeynDyn (Feynman Dynamics) for quantum dynamics using the Feynman integral is in MATLAB and is faster than all the FORTRAN codes that do the same thing. There's also the possibility to compile the code into C or FORTRAN or CUDA, and also to generate C or CUDA code. MATLAB can call C or CUDA or FORTRAN sub-routines, and MATLAB functions can also be compiled to be run by C or CUDA or FORTRAN codes.
  • Running your code on GPUs can require as little as two extra lines: one to get the data copied from the CPU to the GPU, and one to gather it back. Most important number crunching functions in MATLAB are implemented efficiently in CUDA and compiled to machine code already by the MATLAB engineers.
  • Large user community. MATLAB has been around since the 70s and almost every engineer or scientific programmer in the world has used it as some point. MATLAB has its own Q/A site called "MATLAB Answers" whereas for Python all I know is that it's a "tag" in StackOverflow. Most things that you want to do in MATLAB have already been done by someone else, and can be found online easily. Just about anything you've thought of doing in computing, has been done in MATLAB already (for example I wanted to let people use one of my codes but didn't want them to see the code yet because it was messy, and someone many years ago wanted to do this too, so there's a feature to make p-code which is an unreadable file, like a binary file in compiled languages, that runs the code as normal).
  • There's a plethora of toolboxes with tens of thousands of functions already implemented (Bioinformatics toolbox, Image processing toolbox, Parallel Computing Toolbox, and dozens and dozens more).
  • It comes with a debugger and profiler that are better than anything I've seen for other languages (like gdb for FORTRAN) except maybe something like the Java debugger in Dr. Java or Eclipse (I don't know if their profiler is comparably good though).
  • Just as FORTRAN was designed for numerical computing, and therefore has several advantages over things like C and C++ which were designed to be "for everyone" including writing operating systems, GUIs, games, etc., MATLAB was built for no other reason than to do high-performance numerical computing. Python has the same spirit of being easy to code and not having to compile the code every time you want to test it, but Python was built "for everyone" including those who want to make web apps, GUIs, games, etc. Python therefore isn't naturally catered around scientific computing, and requires you to import packages in order to do those things, and those packages like Numpy still make it unnatural to do simple things like defining a matrix (see the examples above).
  • Now in its 6th decade, MATLAB has had many new functions and features and toolboxes added, but the core functionality is mostly the same. MATLAB code from decades ago will often still run, whereas Python 2 and Python 3 can be wildly different.

Some MATLAB programs in matter modeling:

  • Spinach for spin dynamics that supports NMR, EPR, MRI, DNP, MAS, Optimal Control, PHIP, singlet state NMR, and other forms of Magnetic Resonance spectroscopy, and was developed by Ilya Kuprov and his group.
  • FeynDyn (Feynman Dynamics) for quantum dynamics using the Feynman integral on CPUs or GPUs, written by myself.
$\endgroup$
4
  • 2
    $\begingroup$ Julia has most of the advantages listed here without any of the disadvantages above :). The only disadvantage would be that of being a relatively new programming language (But for scientific computing most are mature, except for a few). See also this MATLAB–Python–Julia cheatsheet. $\endgroup$ Nov 3, 2020 at 4:46
  • $\begingroup$ @RashidRafeek I was going to mention Julia in my answer. My understanding is that it's another easy-to-use language like Python and MATLAB, but closer to MATLAB in the syntax (much easier to define matrices for example, than in Python) and just like MATLAB and FORTRAN it's meant for scientific computing and is fast. I upvoted all the people that wrote about Julia, but I haven't personally used it much myself. One advantage of MATLAB that Julia might never have is the sheer # of users, toolboxes, and code available. What about GPUs, debugger, profiler, etc. ? $\endgroup$ Nov 3, 2020 at 5:33
  • 1
    $\begingroup$ @NikeDattani Matlab has easy to grasp syntax. The main turn down of it, is that its not free. For students, going for python on a google colab environment would help them start off quite well atleast for moderately intensive simulations. Since there's a gpu version of quantum espresso, I guess more people would resort to use such free GPU's like Colab. $\endgroup$ Nov 3, 2020 at 8:21
  • 1
    $\begingroup$ @NikeDattani Even though I haven't used it, AFAICT Julia GPUs are fairly mature. I think the debugger is not as good but is being actively enhanced. I do think that Julia will compete with MATLAB in scientific computing in the coming years due to it being free and also features such as multiple dispatch (which allows a very high amount of code-reuse), macros etc. $\endgroup$ Nov 3, 2020 at 10:09

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .